Standard VCI Mk1 VCI Mk2 Manurigator Quad x 4

The Manurigator

The Manurigator is the most advanced liquid manure disposal system, incorporating a total stainless steel water way.

Manurigator features

• Suitable for hilly terrain
• The frame is hot dipped galvanised
• All bearings are lubricated bronze
• Heavy axle fitted with nylon hub and bearing and flotation tyres
• 12 metre stainless rotating drive and distribution arms
• Designed to pull 100 metres of 2" polyethylene or lay-flat hose
• 230 metres of 5 mm galvanised cable
• Flow rates from 40 gallons per minute at 10 psi (70 kPa) up to 200 gpm (best performance between 25 - 45 psi)
• 5 different speeds for maximum application control
• Variable run, automatic shut off
• Up to 35 metre (100 feet) wetted width

The Australian quality built Manurigator will return valuable fertiliser to your pasture; in four years it could pay for itself. For example, nutrients collected at a dairy shed for 120 cows (per lactation):

		Elemental kg	Fertiliser equivalent
	Nitrogen	420	913 kg urea
	Phosphorus	45	500 kg single superphosphate
	Potassium	977	1954 kg potash

 

Legal responsibilities

Schedule D1 of the SEPP (Waters of Victoria) specifically states that milking shed wastes have to be applied to land in such a manner that precludes runoff from the property or pollution of groundwater. This means that both raw wastes and wastes from any treatment and/or storage lagoons must be contained on your property at all times.

It also sets down the following set back distances for the application of wastes to land:
(i) not within 800 metres of any potable water supply off-take controlled by a statutory authority;
(ii) not within 200 metres of any watercourse supplying potable water;
(iii) not within 100 metres of any surface water.

Manurigator specifications (standard model)

• Length: 2150 mm
• Width: 1725 mm
• Height: 1680 mm
• Weight: 150 kg
• Cable: 5 mm galvanised wire rope
• Arm span: 12 metres stainless steel fitted with non clog nozzles
• Wheels: nylon hub 18" x 850 x 8" with non rust nylon bearings
• Flow rate examples:
  5/8 inch nozzle (2 of) @ 35 psi = 120 gpm
  3/4 inch nozzle (2 of) @ 45 psi = 180 gpm

Check the Optional extras and Hose layout and selection.

For maximum distribution control of manure or water and easy handling, choose the Manurigator. Ask your local distributor for a demonstration! We reserve the right to change specifications without notice in the development of this product.